Medical Device QMS, ISO 13485 Requirements and CAPA Regulatory Compliance Training - Live Webinars, Recordings & CDs

This webinar will detail a step-by-step procedure on how to write a practical, effective and compliant Standard Operating Procedures (SOPs), review and revise SOPs and maintain compliance over the course of the SOP life-time.

This webinar discusses methods for estimating process capability for both normal and non-normal data. Methods include estimating the proportion of defective products that may be produced as well as the calculation and use of common process capability indices (e.g. Cpk and Ppk). Process Capability assessments are discussed in the overall context of quality improvement/management.

This webinar will focus on the critical steps in starting up a new cleanroom operation and releasing it for manufacturing. It includes a case study-based approach to dealing with excursion events and establishing control of the cleanroom after a worst case event.

This technical writing training program will offer attendees an understanding of how the reporting process supports products in research, development, and in the marketplace. This virtual session will highlight the mandates for documentation set forth by the regulators, such as the FDA, the ISO, and other governing bodies. The program will train attendees on effectively reviewing and revising documents and assessing your audience, in effect producing effective written correspondence.

Achieving high product reliability has become increasingly vital for manufacturers in order to meet customer expectations amid the threat of strong global competition. Poor reliability can doom a product and jeopardize the reputation of a brand or company. Inadequate reliability also presents financial risks from warranty, product recalls, and potential litigation. When developing new products, it is imperative that manufacturers develop reliability specifications and utilize methods to predict and verify that those reliability specifications will be met. This presents a difficult challenge in many industries with short product cycles and compressed product development time frames. This webinar provides an overview of quantitative methods for predicting product reliability from data gathered from physical testing or from field data.

In this webinar attendees will learn both the U.S. FDA and EU's MDD/MDR expect documented risk-based "master" and "individual" V&V planning. Various validation terms are explained with useable “working” definitions. The Validation Master Plan, and suggested field-tested individual V&V plans, Test Report / Protocol formats, and individual test cases, IQ, OQ, and PQs, are presented.

This webinar will discuss in detail the requirements of 21 CFR part 11 and updated European Annex 11 regulation including requirements for local, SaaS, and cloud hosting. It will also offer techniques to implement a computer system using risk-based validation to gain maximum productivity and reduce cost by as much as two thirds.

This webinar will focus on the Key parts of IEC 62366-1:2015 and -2:2016, Human Factors Engineering and Role in Design Control (21 CFR 820.30)l, Design and Development Planning (ISO 13485 7.3) .

This CAPA investigation training will discuss techniques used by the FDA to review your CAPA system. You will learn what the FDA tells their inspectors to focus in the QSIT document and how your company can use the same QSIT document to prepare for inspection.

This webinar will teach you how to conduct an effective management review of the quality system which helps you understand how to plan and focus on right metrics and governed by an efficient process. Participants will also understand FDA policy regarding disclosure of management review information during inspections.

Attend this webinar to learn the QSR and ISO requirements for supplier evaluation, including defining the types of suppliers that require evaluation, including “critical” suppliers and outsourced processes. The QSR and ISO requirements for supplier assessment will be defined as well. The webinar will discuss the application of a risk-based process resulting in a customized supplier management system.

This training program will discuss designing an effective cleanroom facility validation protocol and report, when and how to transition into the routine environmental monitoring processes, how to maintain a state of control within the cleanroom, and the routine environmental monitoring and excursion investigation processes.

This webinar will help the attendee gain an understanding of the appropriate way to design the processing of all cGMP Controlled raw materials that are used for the manufacturing of drug product. The scope of this webinar applies to all cGMP controlled raw materials that are received, requiring testing, release and issuance of specifications. It also applies to the processing of changes and retiring of previously issued controlled raw materials specification within the product manufacturing process. cGMP Raw materials that are used for product manufacturing has to be released for use in the production process. Guidance will be given as to the steps that every drug product manufacturer should follow in order to process all incoming cGMP controlled raw materials which includes the release for use in the manufacturing of products.

This webinar will discuss how root cause is an essential part of a corrective action system and will provide some examples of how to perform root cause analysis.

This training program will offer attendees an understanding of human error, its factors and causes. The program will also identify the regulatory and business importance of human error prevention and define the process to manage human error deviations.

This webinar will provide understanding of FDA and ISO 13485 requirements for process validation and how to implement them.

This webinar will provide you the information you need to create supplier quality agreements (QA Agreements) with key suppliers and to understand which of your suppliers should have these agreements to meet expectations of the FDA and ISO 13485 Notified Body auditors.

This session will include the requirements for all of the complaint handling responsibilities, which will include defining, documenting, and implementing a complaint-handling system, the requirements for complaint review, investigation, and corrective action, as well as ISO-specific implications. Also covered will be a discussion of what constitutes a complaint, and recommended practice on how to handle "non-complaint" feedback. Also covered will be the application of risk management to a complaint handling system, and a specific risk management system explained.

This webinar will familiarize participants with USP Chapter <1029> on good documentation guidelines. This session will wrap up the general concept and will provide information as to what needs to be documented in certain records.

This webinar will benefit medical device companies planning to have a CE mark under the European Union Directive 93/42/EEC. We will discuss what is new in ISO 14971:2019 and help you avoid delays in obtaining or maintaining your CE mark for compliance to the Medical device Directive, EU Directive 93/42/EEC on Medical Devices.