Medical Device R&D Regulatory Compliance Training - Live Webinars, Recordings & CDs

This webinar will detail a step-by-step procedure on how to write a practical, effective and compliant Standard Operating Procedures (SOPs), review and revise SOPs and maintain compliance over the course of the SOP life-time.

This webinar explains what actions should be taken following an unexpected positive result in a sterility test on a biological indicator (BI) during performance qualification or routine testing. It also addresses the actions to take when a test of sterility demonstrates unexpected growth during validation or routine dose audits. The various items that should be investigated to determine the root cause and the follow up to the investigation will be covered.

This 90-minute webinar will provide valuable assistance to all regulated companies performing and documenting meaningful, results driven 510(k) / change analysis activities, based on the FDA's new Draft Guidance, "510(k) Device Modifications: Deciding When to Submit a 510(k) for a Change to an Existing Device", dated October 25, 2017.

This webinar will focus on the Key parts of IEC 62366-1:2015 and -2:2016, Human Factors Engineering and Role in Design Control (21 CFR 820.30)l, Design and Development Planning (ISO 13485 7.3) .

This 90-minute webinar will examine in detail the U.S. FDA and EU MDD requirements for DHFs, DMRs, DHRs, and TF/DDs - their formats, content, and their commonalities, differences, interrelationships, and similarities.

This CAPA training program will provide an understanding of FDA and ISO requirements, steps in CAPA process and the challenges associated to root cause analysis. Attendees will learn the tools and quality data sources to use during root cause analysis investigation.

This webinar will provide an overview of the FDA expectations in medical device industries for setting up a quality system for FDA audit readiness. It will also provide an understanding of the quality system inspection techniques (QSIT) requirements for documents controls, production and process controls, packaging and labeling controls and more.

This training program will provide the regulatory requirements (US) for complaint handling in the medical device and pharmaceutical industries. The course will touch on complaint sources, and details will be furnished on the interrelationships regarding complaint handling/change control/adverse event reporting/and recalls. The course will also include timeline requirements associated to adverse event reporting, which reporting formats to use, when to recall and types of recalls.

This webinar will help you understand specific product verification and validation requirements for medical devices to comply with ISO 13485: 2016 and FDA quality system regulations. It will focus on the topics such as product development process, traceability and risk management at all stages, design outputs and documentation in DMR and DHR, design verification and design validation activity cycles and more.

This webinar will discuss in detail the methods of sterilization to be used on medical devices and pharmaceutical products including advantages and disadvantages of each method. Also attendees will understand the regulations pertaining to sterilization of products that will help to decide with method to use for their product. Validation of each sterilization method will be discussed and how best to prove to a regulatory body the products being treated are considered sterile.

This webinar will focus on the key regulatory requirements for medical devices for the participating MDSAP countries of U.S., Canada, Brazil, Australia and Japan. It will address key topics such as device classification, licensing pathways, medical device GMP, inspections, device labeling, license holder responsibilities and more.

This webinar will explain how to create Failure Mode Effects Analysis (FMEA) by combining Effective Information Collection (EIC), Process Reliability Modeling (PRM) and Failure Mode Effect Criticality Analysis (FMECA). It will also cover the methods for determining root causes of process problems and effective tools for repair of ineffective processes.

This training program will examine the approval process for drugs, biologics and devices and elaborate FDA submission requirements and guidances. It will also discuss electronic regulatory submission and gateway for FDA and FDA eCTD guidance and specifications.

This webinar will discuss the role of Process Challenge Devices (PCDs) both during ethylene oxide (EO) validation and during routine processing. It will explain the difference in requirements for PCD during both the processes.

In this training program, attendees will learn quick formatting tips that will make writing more readable and learn how to use formatting tools in a way to maximize the impact of their writing in an electronic system.

This webinar will discuss the regulatory requirements and the processes, tools and techniques for conducting an effective risk and hazard analysis for medical devices as per FDA, FTA, FMEA, and FMECA guidelines.

This training program on applicable regulations pertaining to clean room environmental monitoring (EM) programs will discuss the basics of setting a robust and effective EM program. The course will also detail the relationship between an EM Excursion Program and CAPA and the four phases of clean room transitional monitoring.

This training program will focus on how cell cultures are used for in vitro assays. It will include examples of cell based assay systems and list the advantages of cell based assays. The webinar will help attendees understand the uses of in vitro testing with eukaryotic cell based systems, the parameters to be considered in the development and optimization of a cell based assay and the validation of a cell based assay.

This webinar will define human factors engineering and its role in the success of new product development. The session will use real world examples to demonstrate how human factors engineering makes a significant.

A tougher U.S. FDA expects a company to maintain certain documents in equipment, process and product software V&V. These documentation requirements can assist in a 21 CFR Part 11 CGMP records / signature V&V as well. This training program will provide valuable assistance to all regulated companies in evaluating their existing or anticipated software V&V activities and documentation requirements, especially in light of the changes in the FDA's stance vis a vis industry compliance, past problems, and the growing cloud environment. It will help attendees understand and recognize the most common software V&V failings and their fixes. The webinar will allow attendees to develop and use a repeatable software V&V template for all software validation projects.